Your Position: ShippingOnline.cn > Ship Supply > Products
Products
 |
JHS-32A VHF radiotelephone Supply and Install
SP2731
CHINA
USD
11 Aug 2011
Brief Desctiption
SPECIFICATIONS
JHS-32A VHF radiotelephone Transmission frequency range 155.000 to 159.500 MHz
Reception frequency range 155.000 to 159.500 MHz （simplex）
160.600to 163.500 MHz （duplex）
Cannel capacity Up to 57 ITU/USA/Canadian channels
Up to 99 private channels
Up to 10 memory channels
9 weather channels （For reception only）
Channel spacing 25 kHz/10kHz
Mode of operation Simplex or duplex
（Simplex or semi-duplex on private channels）
Mode of modulation G3E, G2B, （F3E, F2B）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Output power 25W/1W, selectable
Receiver sensitivity 2uV or less（20dB NQ）
Receiver sensitivity （DSC） 1% or less symbol error rate at 1uV antenna input
Major operation items Starting and stopping distress alert
Setting transmitter/receiver channels and transmission power
Adjusting dimmer, squelch, and volume
Major display items For telephone mode: transmitter/receiver channels, status of operation modes, date, time and position
For DSC mode: message （9 lines × 40 characters）, error display and operation guide （4 lines × 40 characters）
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and 24 VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
NCH-414 Remote Controller Operation and display items The same as the JHS-32A
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and
24 VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
NKG-52 Printer Printing system Thermal type serial dot printer
Input interface Centronics （15 pin D-Shell）
Input data 8 bit parallel
Character format 7 × 5 dot matrix
Printing paper FH65BU-2 thermal paper, 80 mm wide
Power supply 5 VDC, 3 W maximum （To be supplied from the JHS-32B）
CH70 DSC watchkeeping Receiver （Built-in） Reception channel Channel 70 （156.525 MHz）
Mode of modulation F2B（G2B）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Receiver sensitivity 1% or less symbol error rate at 1uV antenna input.
NRE-332 Guard Receiver Mode of reception Simultaneous reception of two selected channels
Reception channels Up to 57 ITU/USA channels
Mode of modulation G3E （F3E）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Receiver sensitivity 2uV or less （20dB NQ）
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and 24VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
JHS-32A VHF radiotelephone Transmission frequency range 155.000 to 159.500 MHz
Reception frequency range 155.000 to 159.500 MHz （simplex）
160.600to 163.500 MHz （duplex）
Cannel capacity Up to 57 ITU/USA/Canadian channels
Up to 99 private channels
Up to 10 memory channels
9 weather channels （For reception only）
Channel spacing 25 kHz/10kHz
Mode of operation Simplex or duplex
（Simplex or semi-duplex on private channels）
Mode of modulation G3E, G2B, （F3E, F2B）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Output power 25W/1W, selectable
Receiver sensitivity 2uV or less（20dB NQ）
Receiver sensitivity （DSC） 1% or less symbol error rate at 1uV antenna input
Major operation items Starting and stopping distress alert
Setting transmitter/receiver channels and transmission power
Adjusting dimmer, squelch, and volume
Major display items For telephone mode: transmitter/receiver channels, status of operation modes, date, time and position
For DSC mode: message （9 lines × 40 characters）, error display and operation guide （4 lines × 40 characters）
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and 24 VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
NCH-414 Remote Controller Operation and display items The same as the JHS-32A
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and
24 VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
NKG-52 Printer Printing system Thermal type serial dot printer
Input interface Centronics （15 pin D-Shell）
Input data 8 bit parallel
Character format 7 × 5 dot matrix
Printing paper FH65BU-2 thermal paper, 80 mm wide
Power supply 5 VDC, 3 W maximum （To be supplied from the JHS-32B）
CH70 DSC watchkeeping Receiver （Built-in） Reception channel Channel 70 （156.525 MHz）
Mode of modulation F2B（G2B）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Receiver sensitivity 1% or less symbol error rate at 1uV antenna input.
NRE-332 Guard Receiver Mode of reception Simultaneous reception of two selected channels
Reception channels Up to 57 ITU/USA channels
Mode of modulation G3E （F3E）
Frequency accuracy ±10 × 10-6 or less
Antenna impedance 50 ohms, unbalanced
Receiver sensitivity 2uV or less （20dB NQ）
Power supply voltage 100 to 120 VAC （50/60 Hz） or 200 to 240 VAC （50/60 Hz）, and 24VDC （21.6 to 31.2 VDC）
Power source selection Normally AC operation. Automatic switching to DC operation at AC power failure.
HKEY Ship Automation Engineering Co.,Ltd
is a characteristic and comprehensive ship’s repairing/maintenance service company. The main businesses are based on marine automation engineering and spare parts .
We are Specialized in :
＊ BNWAS
＊ M/E Remote Control
＊ C.P.P. Remote Control
＊ Engine Room Alarm & Monitoring System
＊ Generator Control / MSB / AVR
＊ Fire & Gas Detection
＊ Boiler Control System
＊ Temperature, pressure, Level Alarm System
＊ Cargo Pump Control system
＊ Inert Gas System
＊ Variable pulp, Autopilot system
＊ Flammable gases and toxic gas detection system
＊ Aids: Radar, Compass, VHF、VDR...
Message
Supplier Details
Please Sign in to View Supplier Contact
